Makita 4112H Technical Information page 4

R
epair
< 4 > Assembling gear section
( 1 ) Mount spindle by pressing with arbor press from wheel side. See Fig. 6.
( 2 ) Mount spiral bevel gear 48 together with lock sleeve. See Fig. 7.
( 3 ) Mount flat washer 15. Secure the spiral bevel gear 48 and the flat washer 15 with retaining ring S-15.
See Fig. 8.
( 4 ) Mount flat washer 15. Secure the spiral bevel gear 48 and the flat washer 15 with retaining ring S-15.
See Fig. 8.
( 5 ) Put ball bearing 6000LLB on the bearing setting plate. Mount the spindle which has been mounted to the bearing
box, to the ball bearing 6000LLB by pressing with arbor press. See Fig. 9.
The assemble of gear section has been completed at this stage.
( 6 ) Mount the gear section to gear housing, and secure it with 4 pcs.of pan head screw M5x14. See Fig. 10.
Spindle
Bearing
box
Fig. 6
Bearing
setting plate
Ball bearing
6000LLB
Fig. 9
Lock sleeve
Spiral
bevel gear 48
Fig. 7
Hex bolt M5x14
Gear section
Fig. 10
P 4 / 11
Retaining
ring S-15
Flat
washer 15
Fig. 8