Wiring Diagram - Makita 4112H Technical Information

W
iring diagram
Wiring in the motor housing (Model 4112H and 4112HS)
Hook
Hook
Wiring in the handle
(Model 4112H)
Wiring in the handle
(Model 4112HS)
The slits of insulated receptacles
have to be faced to the same
direction, when connecting to
the terminals of switch.
Rib
Pass the lead wires of power supply
cord by the rib.
Pass the following lead
wires through the hook.
* Field lead wire (black)
* Field lead wire (orange)
Pass the following lead
wires through the hook.
* Field lead wire (black)
* Connecting lead wire (orange)
of brush holder
Put noise suppressor in this space,
if it is used.
Terminal of switch
Put noise suppressor in this space,
if it is used.
Hold the 2 field lead wires
(black) with lead holder.
Slit
Insulated receptacle
If line filter is used, pass 2 field
lead wires (black) through it.
Soft start circuit
And put the line filter in this place.
Connecting lead wire (purple)
of brush holder
Field lead wire
(purple)
Field lead wire
(orange)
Connecting lead wire (orange)
of brush holder
Field lead wire (black)
Hold the following lead
wires with lead holder.
*Field lead wire (purple)
*Field lead wire (orange)
*Connecting lead wire
(purple) of brush holder
*Connecting lead wire
(orange) of brush holder
Hold the following lead
wires with lead holder.
* 2 Field lead wires
(black)
* Soft start lead wire
(white)
* Soft start lead wire
(orange of red)
Hold the following lead
wires with lead holder.
*Field lead wire (purple)
*Field lead wire (orange)
*Connecting lead wire
(purple) of brush holder
*Connecting lead wire
(orange) of brush holder
P 11 / 11