Indel B K BASIC Series Instructions For Use Manual page 24

K BA S IC - K SMART - K ECOSMART
WIRIN G CO NNEC TIO N S AND E ARTHIN G
Before putting the plug into the power socket, make sure the mains voltage is the same as the one
shown on the technical specification plate (located inside the Minibar) and that the socket is equipped
with proper earthing, as laid down in the regulations on wiring system safety. Also, the power socket
must be able to hold up to the maximum power of the device, shown on the same plate.
Attention please!
If the socket is not equipped with an earthing system or if multiple sockets or adaptors are used, the
Manufacturer will not be liable for any injury or damage to things and/or to the Minibar.
Attention please!
The user must always be able to access the power supply socket.
Attention please!
If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
KBASIC-KSMART-KECOSMART_(115V)_IM_20190204
22