Kramer VIA Connect PLUS Quick Start Manual page 2

Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your VIA Connect PLUS. For best results, we recommend
that you always use Kramer high-performance cables to connect AV equipment to VIA Connect PLUS.
1. Connect the keyboard and mouse.
2. Connect one display (HDMI or Mini DisplayPort). Note: Only one display can be connected at a time.
3. Connect laptop or other HDMI source.
4. Connect a Local Area Network (LAN) cable for connection to your network.
OR
Use a wireless router for connecting to the device with Wi-Fi.
Step 5: Connect the power
Connect the 19V DC power adapter to VIA Connect PLUS and plug it into the mains electricity.
Safety Instructions (DC)
Caution: There are no operator serviceable parts inside the unit.
Warning: Use only the Kramer Electronics power adapter that is provided with the unit.
Warning: Disconnect the power and unplug the unit from the wall before installing.
See www.KramerAV.com for updated safety information.
Step 6: Configure VIA Connect PLUS
A wizard guides you through configuration. If you choose to skip the wizard, follow these steps for configuration:
1. On the Kramer VIA dashboard, click Features > Settings.
2. Enter the User Name (default = su) and Password (default = supass)
and click Login.
The VIA Settings window appears.
3. The VIA Settings tabs are:
LAN Settings – Configure your network parameters and apply settings
(DHCP is enabled by default).
System Controls – Manage your display and audio settings, run control
panel, select your language, etc.
Wi-Fi (with USB to Wi-Fi dongle connected) – Set up your Wi-Fi adapter
as a secondary access point or attach your unit as a client device to
your main Wi-Fi network.
4. When you have finished defining settings, click Reboot to apply all
settings. For more details, see the VIA Connect PLUS User Manual.