Decagon Devices SC-1 Operator's Manual page 37

Leaf Porometer Operator's Manual
4. Sensor Head Calibration
3) Verify Sensor Head Equilibrium
You will be reminded to make sure the sensor head is in
thermal equilibrium with its surroundings (see #1 above).
Press Enter to move to the next step.
4) Enter Serial Number
You will be prompted to enter the sensor head serial num-
ber. This number can be found on a tag attached to the
sensor head. Select the number by pressing the up and
down arrow keys to select a number and pressing enter after
each digit.
33