Advertisement
Do not rely exclusively upon the safety devices built into your saw. As a chain saw user, you should take several
steps to keep your cutting jobs free from accident or injury.
Kickback is the result of tool misuse and/or incorrect operating procedures or conditions and can be avoided
by taking proper precautions as given below:
Maintain a firm grip, with thumbs and fingers encircling the chain saw handles, with both hands on
•
the saw and position your body and arm to allow you to resist kickback forces. Kickback forces can be
controlled by the operator, if proper precautions are taken. Do not let go of the chain saw.
•
Do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact
and enables better control of the chain saw in unexpected situations.
Only use replacement bars and chains specified by the manufacturer. Incorrect replacement bars and
•
chains may cause chain breakage and/or kickback.
Follow the manufacturer's sharpening and maintenance instructions for the saw chain. Decreasing the
•
depth gauge height can lead to increased kickback.
ELECTRICAL CONNECTION
The insulation on the grounded three metre electrical cord will only remain effective if the original insulating
parts are used for repairs and the spaces between the original insulation are maintained.
The use of a Residual Current Device ("RCD"), on 230V electrics is recommended. If using an extension cable,
plug it directly into the RCD
SPECIFICATIONS
Weight (empty tank, without guide bar
Declared Vibration Emission
Noise Emission Value
The manufacturer reserves the right to change the product specification and livery according to continued
Do not connect either core to the earth pin
Model
Product Number
Motor Power
Motor Voltage
Chain Speed
Guide Bar Length
Chain Pitch
Chain Drive Links
Chain Gauge
Oil Tank Capacity
Cable Length
and chain)
Protection
product improvements.
THECS40
193885002
2200 watt
230-240V/50HZ
13.5m/s
406mm
3/8"
57
0.050"
240ml
3m
4.2kg
4.5m/s², K=1.5m/s²
L
: 108 dB(A) – K
: 3 dB(A)
WA
PA
CLASS II
Advertisement
