Advertisement
INSTRUCTION MANUAL
RISIDUAL RISKS
Even with the intended use of the appliance there is always a residual risk, which cannot be prevented.
According to the type and construction of the appliance the following potential hazards might apply:
- Contact with exposed saw teeth of the saw chain (cutting hazards)
- Access to the rotating saw chain (cutting hazards)
- Unforeseen, abrupt movement of the guide bar (cutting hazards)
- Flung out of parts from the saw chain (Cutting / injection hazards)
- Flung out of parts of the work piece
- Inhalation of wood particles,
- Skin contact with chain oil,
- Loss of hearing, if required ear protection not used during work.
ELECTRICAL REQUIREMENTS
Connect the main leads to a standard 220-240V±10% (50Hz±1Hz) electrical supply which has protection
devices of under-voltage, over-voltage, over-current as well as a residual current device (RCD) which maximum
residual current rated at 0.03A.
EXTENSIONS LEADS
Improper use of extension cords may cause inefficient operation of the machine which can result in
overheating. Be sure the extension cord is no longer than 10m and its section is no less than 2.5mm² to allow
sufficient current flow to the motor. Avoid use of free and inadequately insulated connections. Connections
must be made with protected material suitable for outdoor use.
INSPECT YOUR LOG
Make sure there are no nails or foreign objects in logs to be split.
WARNING
Please note that our equipment has not been designed for use in commercial, trade or industrial
applications. Our warranty will be 90 days from the original date of sale for commercial, trade or industrial
businesses or for equivalent purposes
.
Advertisement
