Function Control; General; Adjustments And Operating; Adjustments - probst PW-III Operating Instructions Manual

Adjustments and operating

3.7

Function Control

3.7.1

General


Before using the device check the functions and the working condition.

Maintenance and lubrication are only permitted when device is shut down!

Do not use the device, until all faults which can cause safety hazards are removed.

If there are any cracks, splits or damaged parts on any parts of the device, immediately stop using it.

The operating instructions must be available at the workplace every time.

Do not remove the type plate of the machine.

Unrecognisable information signs (such as regulatory or prohibition signs) must be replaced.
4 Adjustments and operating
4.1

Adjustments


Before using the device (PW III) adjust the forks (3) according to the corresponding distance.

The forks (3) are displaceable and can so be adjusted stepless.
5110.0011
Abb. 1
V2
3 Forks
8 / 12
GB