Table of Contents
Advertisement
7. Using the XP-100D/400D Series
7.1 Menu description
Press the Menu/OK button on the front to enter the menu mode.
of the main menus, and set and used according to the application and the environment, it can be
more convenient to use.
Note) If the menu is not operated for at least 25 seconds after launch, the menu mode is
automatically end and it is switch to receive mode.
7.1.1 Contact List
Set a contact list (set to CPS program) and will be pressing the PTT button to call. If you want to
call with another registered contact, after you select a contact from the contact list and press the
PTT button, it will be the call.
the CPS(Customer Programing Software) program.
When you enter in the contact menu, the individual, group and All Call contact list is displayed.
ICON
-
: Individual Contact List (individual Call , Sending individual message)
-
: Group Contact List (Group Call , Sending group message)
-
: All Contact List ( All call, Sending Message to terminal which has same channel
and same color)
7.1.2 Message
When a new message arrives, the contents will be display on LCD in receive mode.
And if you are in other mode, it will be seen in the ICON form when a new message arrives.
Message menu has a simple message, inbox, outbox, three kinds of menu.
1)
Simple Message
Using the CPS program can create a total of 10 messages and
One message can be edit up to 40 characters.
If you select a simple message menu you can view the registered message.
Select the message you want to send, and press the Menu/OK button, you can see the
contents of the message.
sent to the registered terminal.
Figure 7-1) XP-100D/400D Menu
The list of contacts in the menus can be registered / deleted using
When you press the
In the menu mode, there are eight
Menu/OK
button again, the message will be
Advertisement
Table of Contents
