Charging The Battery; Charging Time; How To Charge - YEONHWA M TECH XP-100D User Manual

Vhf uhf transceiver
Table of Contents

Advertisement

6. Charging the Battery

6.1 Safety Notes
1) The radio of XP-100D/400D series receives power from high-performance Li-ion battery (XL-
260).
XL-260 Battery is safe of high performance and highly reliable, and could be charged very fast.
The charging of the enclosed Radio on t
cause damage on the battery and also, will cause a trouble on the Radio.
2) Please charge the battery before using the radio for best performance and safety.
3) When you charge the battery that is installed in the Radio, please turn off the radio first to charge
the battery.
The continuous rapid discharge (for example, when making a short circuit
and the battery can be exploded. Also, it can cause a fire.

6.2 Charging time

Low battery voltage maybe cause to reduce communication coverage and also make the
performance worse. Please charge the battery in case of following:
1) When you think that the performance of the radio has degradation.
2) The red lamp on RX/TX LED blinks. (every 0.5 second), during transmission or reception.
3) When the battery icon is blinks
4)

6.3 How to charge

1) Plug the adapter of the TAD-800L charger in general power AC220V power outlet.
2) When charging the battery that is equipped with radio, please turn off the power of
the Radio and plug the Radio in the charger.
3) Even if charging is completed (green lamp lights), please charge more for about 30
minutes for a full charge.
Status
Charging
Complete charging
LED indication
Red LED lights
Green LED lights
Status
Detecting error
Red LED is flicker
Keep charging
LED indication
Green LED lights

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp-400d

Table of Contents