Table Of Contents - Worx PowerShare WX371 Original Instructions Manual

ACCESSORIES
WX371
Charger 1(WA3860)
Battery pack 1(WA3551.1) 2(WA3551.1)
Double
Ended Bit 1
(PH2/SL5.5)
158pcs ac-
/
cessories
55pcs ac-
/
cessories
WX371.4 WX371.5 WX371.6
Charger 1(WA3860) 1(WA3760) 1(WA3760)
Battery pack 3(WA3551.1) 2(WA3551.1) 2(WA3551.1)
Double
Ended Bit 1
(PH2/SL5.5)
158pcs
/
accessories
55pcs
/
accessories
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
10
the accessory packaging for further details. Store
personnel can assist you and offer advice.
Cordless hammer drill
WX371.1 WX371.2 WX371.3
1(WA3860) 1(WA3760) 1(WA3760)
2(WA3550.1) 2(WA3550.1)
1 /
/ 1
/ /
WX371.9
/ 1
/ /
1 /
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for driving in and
loosening screws as well as for drilling in wood,
1
metal and plastic.
/
ASSEMBLY AND
OPERATION
/
/
BEFORE OPERATION
/
Removing the battery pack
1
Charging the battery pack
/
Installing the battery pack
ASSEMBLY
/
CHUCK ADJUSTMENT
WARNING: Always lock off trigger switch
and disconnect tool from power source when
changing accessories. Always ensure the bit is secure
before starting the tool. Damage to the Chuck or a
loose bit may cause possible personal injury.
--Removing the bits
--Inserting the bits
OPERATION
FORWARD/REVERSE ROTATION
CONTROL
WARNING: Never change the
direction of rotation when the chuck
is rotating, wait until it has stopped!
TWO-SPEED GEAR CONTROL
TORQUE ADJUSTMENT
SCREWDRIVING, DRILLING,
HAMMER DRILLING
OPERATING THE ON/OFF
SWITCH
WARNING: Do not operate
for long periods at low
speed because excess heat will be
produced internally.
ACTION FIGURE
See Fig. A1
See Fig. A2
See Fig. A3
See Fig. B1
See Fig. B2
See Fig.C1,
C2, C3
See Fig. D
See Fig.
E1, E2, E3
See Fig. F
EN