West Elm Romantic Industrial Assembly Instructions

Important Safety Instructions:

•
These instructions are provided for your safety. It is very important that they are read carefully and completely before
beginning the assembly and installation of this lighting fixture.
•
This portable luminaire has a polarized plug (one blade is wider than the other) as a safety feature to reduce the
risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug
can be fully inserted. Do not alter the plug. Do not attempt to defeat this safety feature.
•
This fixture has been rated for up to one (1) 60-watt maximum TYPE A standard incandescent light bulb (not
included) or one (1) 13-watt compact fluorescent light bulb (not included) or one (1) 20-watt maximum SBLED
light bulb (one 9-watt SBLED light bulb included). To avoid the risk of fire, do not exceed the recommended lamp
wattage.
•
The lamp is meant for indoor use.
•
Save these instructions.
WARNING:
•
To reduce the risk of fire, electrical shock or personal injury, always turn off and unplug the light fixture
and allow it to cool prior to replacing the light bulb.
•
Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
•
Keep flammable materials away from lit bulb.

Pre-assembly:


Remove all parts and hardware from box along with any plastic protective packaging.

Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.

Parts Included:

(A) Socket (1)
(B) Shade (1)
(C) Socket Ring (1)
(D) Upper Tube (1)
(E) Clamping Nut (1)
(F) Lower Tube (1)
(G) Power Cord (1)
(H) Base (1)
(I) Flat Washer
(J) Toothed Washer (1)
(K) Nut (1)

Hardware Enclosed:

(L) Wrench (1)
L
1x
A
B
C
H
US/CN
Romantic Industrial Floor Lamp
Assembly Instructions
D
E
F
I
J
K
L
G
Page 1 of 3