West Elm Mid-Century Task Table Lamp-V2:Tall: USB Assembly Instructions

Important Safety Instructions:

•
These instructions are provided for your safety. It is very important that they are read carefully and completely before
beginning the assembly and installation of this lighting fixture.
•
This fixture has been rated for up to one (1) E27 40-watt maximum TYPE A light bulb (not included). To avoid the
risk of fire, do not exceed the recommended lamp wattage.
•
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer
or his service agent or a similar qualified person in order to avoid a hazard.
•
This lamp is meant for indoor use.
•
Save these instructions.
WARNING:
•
To reduce the risk of fire, electrical shock or personal injury, always turn off and unplug the light fixture and
allow it to cool prior to replacing the light bulb.
•
Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
•
Keep flammable materials away from lit bulb.

Pre-assembly:


Remove all parts and hardware from box along with any plastic protective packaging.

Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.

Parts Included:

(A) Lamp Shade (1)
(B) Light Bulb (1) (not included)
(C) Socket (1)
(D) Stem (1)
(F) Lamp Pole (1)
(G) USB Port (1)
Mid-Century Task Table Lamp-V2:Tall: USB
IP
Assembly Instructions
Page 1 of 2