West Elm Wood and Glass Shelf Light Assembly Instructions

Important Safety Instructions:

•
These instructions are provided for your safety. It is very important that they are read carefully and completely before
beginning the assembly and installation of this lighting fixture.
•
The lighting fixture is meant for indoor use. It must be connected only to 3-wire, single-phase electrical supply systems
(provided with Ground wire or equivalent protection system).
•
This fixture has been rated for up to one (1) 40-watt maximum TYPE G standard incandescent light bulb (not
included) or one (1) 9-watt compact fluorescent light bulb (not included) or one (1) 12-watt maximum SBLED light
bulb (one 5-watt SBLED bulb included). To avoid the risk of fire, do not exceed the recommended wattage.
•
This lamp is meant for indoor use, DRY LOCATIONS ONLY.
•
Save these instructions.
WARNING:
•
To reduce the risk of fire, electrical shock or personal injury, always turn off and unplug the light fixture and
allow it to cool prior to replacing the light bulb.
•
Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
•
Keep flammable materials away from lit bulb.
•
Maximum total load weight for the shelf is 20lbs. Do not overload.

Pre-assembly:


Remove all parts and hardware from box along with any plastic protective packaging.

Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.

For your safety and convenience, assembly by two people is recommended.
Tools Required (not included):
US/CN
Wood and Glass Shelf Light
Assembly Instructions
Page 1 of 5