Page 2
Sehr geehrter Kunde, wir gratulieren Ihnen zum Erwerb Ihres Gerätes. Lesen Sie die folgenden Hinweise sorgfältig durch und befolgen Sie diese, um möglichen Schäden vorzubeugen. Für Schäden, die durch Missachtung der Hinweise und unsachgemäßen Gebrauch entstehen, übernehmen wir keine Haftung. Sicherheitshinweise •...
Page 3
Montage Benötigtes Werkzeug • Schraubenschlüssel • Schraubendreher Schritt 1: Befestigung der Standfüße 1. Führen Sie einen Standfuß mit den beiden Gewinden durch die Bohrungen der Schale. 2. Legen Sie von oben zwei Unterlegscheiben (S4) auf die durchgeführten Gewinde. 3. Schrauben Sie jeweils eine Sechskantmuttern auf das Gewinde.
Page 4
Dear Customer, Congratulations on purchasing this Klarstein equipment. Please read this manual carefully and take care of the following hints on installation and use to avoid technical damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the operation and installation instructions are not covered by our warranty and any liability.
Page 5
Installation Required tools • Wrench • Screwdriver Step 1:Fastening the bowl legs 1. Place a bowl leg with its two threads through the holes in the bowl. 2. Place two wahers (S4) on the respective threads from above. 3. Fasten a hexagonal nut (S1) on the respective thread.
Need help?
Do you have a question about the 10028489 and is the answer not in the manual?
Questions and answers