Product Operation - Royal Sovereign RBC-EG100 Owner's Manual

PRODUCT OPERATION

1. Attach the power adapter to the back of the machine, plug into an outlet, and turn the switch on.
The unit will conduct an automatic self-diagnostics to ensure accurate counts.
•
After three seconds of the counting wheels spinning, the screen will display "0".
•
If there is a problem, the preset display will show an error code. (See ERROR CODE DISPLAY AND
•
SOLUTIONS – LOCATED ON PAGE 8 & 9.)
2. Before counting, select counting settings that are related to your counting needs:
Auto and Manual Start Modes: The machine is preset to automatically start counting bills once placed
•
into the hopper. To change to manual start mode, press the "M/A" button, insert the bills into the hopper,
and press the "RESET" button to start counting. Press the "M/A" button again to return to auto mode.
Add Mode: The Add mode displays the cumulative total of all bills counted. To turn the ADD mode on,
•
press the "ADD" button.
Batch Mode: The machine is preset to common counting mode. To count bills in batches, press the
•
"BATCH" button. Batching is preset to 100 bills. To change the batch amount, use the keypad to enter a
batch number between 1 and 999. Press the "BATCH" button to clear.
Counterfeit Detection: When the machine is turned on, all counterfeit detection methods are
•
automatically enabled. To turn on/off counterfeit detection methods, press the "FUNC" button. If a
suspicious bill is found, the machine will stop counting to allow removal and will display the error code on
the display. To resume counting, simply press "RESET".
•
•
•
•
Press "FUNC" once to have UV, IR, and DD methods on.
Press "FUNC" again to have DD method on.
Press "FUNC" again to turn off all detection methods (Basic Count Mode).
Press "FUNC" again to turn on all detection methods (MG, UV, IR, and DD).
6