Advertisement
PROG
Turn the selector dial to PROG.
1. Create your 24-hour programme
0h
6h
8h
17h
23h
Exemple : Comfort from 6:00 to 8:00 and from 17:00 to 23:00
PROG x1
Setback period
Press
until 06.00.
PROG x7
Press
until 06.00.
2. Check your program
Press
The programme begins
Economy periods you have created.
on day 1 (Monday) and at 00:00.
Press OK to check the next day.
1 : Monday,
•
•
•
7 : Sunday,
The programming may be done in increments of one hour, 30 minutes, or 15 minutes (refer to the "installation guide", menu 1-02).
This mode protects your home from frost if you are absent for several days.
Turn the selector dial
Enter the return date
1
31
Confirm
To change the mode
in progress, press OK again.
To cancel the current absence mode, turn the selector dial.
24h
Press the buttons
or
to
create your different Economy
or Comfort periods.
Comfort period
Press
until 08.00.
Press
until 08.00.
to check the Comfort and
and enter the return date.
1
12
2012 ...
Confirm
Confirm
Return to AUTO
mode at the end of
the countdown, at
00:00.
The programme may be weekly (PROGx7) or daily
(PROGx1). This choice is made using the switch on the
back of the device.
This programming can also be done in one-hour, half-
hour, or quarter-hour stages.
If you wish to change these settings, refer to the
«installation guide» or contact your installation engineer.
Press
Press
until 17.00.
until 23.00.
Press
Press
until 17.00.
until 23.00.
The Frost Protection
setting is adjustable
(§ «Setting
temperatures»).
18/02/2012
00.00
This mode is used to switch your heating
installation off. Turn the selector dial to
In this mode, the device displays the room
temperature.
1
Confirm
Press
until 00.00.
Confirm and continue on to the next day to program
it separately or confirm the program and copy it to
the next day.
Press
until 00.00.
Confirm
OR
OR
>3s
COPY
Hold down the OK button for 3 seconds to
confirm the programme you have created
and copy it to the next day.
Repeat for each day of the week.
When the batteries symbol appears. you have
approximately 1 month to change the batteries
(2 1.5 V LR03 or AAA alkaline batteries).
1
STOP
3
.
You have approximately 30 seconds to change
the batteries before the time setting is reset
(if this happens, reprogramme the date and time).
PROG x 7
A
B
PROG x 1
3
To exit the mode,
turn the selector dial.
EXIT
Repeat for each
day of the week.
2
7
2
7
EXIT
To exit the mode,
turn the selector dial.
Alkalines 1,5V
LR03 (AAA)
2
4
Advertisement
