Makita EB7650TH Original Instruction Manual page 4

Hide thumbs Also See for EB7650TH:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Start the Blower only in accordance with the instructions. Do not use any
other methods for starting the engine (6).
Use the blower and the tools supplied only for applications specified.
Start the blower engine only after the entire tool has been assembled.
Operation of the tool is permitted only after all the appropriate accessories
are attached.
The engine is to be switched off immediately if there are any engine
problems.
When working with the blower, always wrap your fingers tightly around
the handle, keeping the control handle cradled between your thumb and
forefinger. Keep your hand in this position to have your machine under
control at all times. Make sure your control handle is in good condition
and free of moisture, pitch, oil or grease.
Always ensure a safe, well-balanced footing.
Carry the blower properly on both shoulders during operation. Do not
carry the blower with only one shoulder strap. Otherwise personal injury
may result.
Operate the blower in such a manner as to avoid inhalation of the exhaust
gases. Never run the engine in enclosed rooms (risk of suffocation and
gas poisoning). Carbon monoxide is an odorless gas.
Always ensure there is adequate ventilation.
Switch off the engine when resting or leaving the blower unattended.
Place it in a safe location prevent danger to others, setting fire to
combustible materials, or damage to the machine.
Never lay the hot blower onto dry grass or onto any combustible
materials.
All protective parts and guards supplied with the machine must be used
during operation.
Never operate the engine with a faulty exhaust muffler.
Shut off the engine during transport (7).
Position the blower safely during car or truck transportation to avoid fuel
leakage.
When transporting the blower, ensure that the fuel tank is completely
empty.
Carry the blower by its carry handle. Do not drag the blower by nozzle,
pipe or other parts.
When transport the blower, bent your knee and make sure you do not
damage your shoulder and lower back.
Refuelling
Shut off the engine during refuelling (7), keep well away from open flame
(8) and do not smoke.
Avoid skin contact with petroleum products. Do not inhale fuel vapor.
Always wear protective gloves during refuelling. Change and clean
protective clothing at regular intervals.
Take care not to spill either fuel or oil in order to prevent soil contamination
(environmental protection). Clean the blower immediately after fuel has
been spilt. Allow wet cloths to dry before disposing in properly, covered
container to prevent spontaneous combustion.
Avoid any fuel contact with your clothing. Change your clothing
immediately if fuel has been spilled on it (fire hazard).
Inspect the fuel cap at regular intervals making sure that it stays securely
fastened.
Carefully tighten the locking screw of the fuel tank. Change locations to
start the engine (at least 3 meters away from the place of refuelling) (9).
Never refuel in closed rooms. Fuel vapors accumulate at ground level
(risk of explosions).
Only transport and store fuel in approved containers. Make sure stored
fuel is not accessible to children.
Do not attempt to refuel a hot or a running engine.
(6)
Resting
Transport
Refuelling
Maintenance
Tool Replacement
(7)
(8)
(9)
4
3 meters

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eb7650wh

Table of Contents