Button Functions - agratronix BHT-2 Operator's Manual

DEFINITION
"NORMAL OPERATION MODE" - This is the default mode the tester is in
at power up and will be displaying the moisture of the hay in the chamber.

BUTTON FUNCTIONS

A
POWER ON/OFF (A)
The power on/off button (A) turns the tester on or off.
TURNING THE UNIT ON OR OFF
Press and hold the power on/off button (A) for approximately one second
to turn the unit on. Press and hold the power on/off button (A) for approx-
imately one second to turn the unit off.
NOTE: Unless you have the tester's positive (+) 12 volt wire connected
to a power wire that is controlled by the tractor's ignition switch, the
display module will remain on even after the tractor is turned off. You
must turn the tester off to prevent accidental battery discharge.
Operation
B C
13
F
G
H
E
D