agratronix Hay Core Sampler Operator's Manual

Table of Contents

Download this manual

Operators Manual

Hay Core Sampler

ENGLISH

DOCU-M0170

Table of Contents

Need help?

Do you have a question about the Hay Core Sampler and is the answer not in the manual?

Page 1 Operators Manual Hay Core Sampler ENGLISH DOCU-M0170...
Page 3 Box Contents and Parts Thank you for choosing the Hay Core Sampler that is used to gather samples from Straw, Hay, or Silage bales in easy and convenient way. The Hay Core Sampler ensures fast and contamination-free sampling. Read this manual carefully to learn how to operate this unit correctly.
Page 4 (remove moisture from it for example) Usage Hay Core Sampler is meant to be operated with ½” or 3/8” battery drills or 120V corded electric drills. At least 18V cordless drill is recommended. (Fig.1) Do not wear any loose clothing when using Hay Core Sampler. Be aware that the cutting tip is very sharp, especially when using the cleaning rod.
Page 5 Maintenance Cleaning and Storage After use clean the hay core sampler with a damp cloth and rub it dry. Store in dry place, preferably inside where the temperature stays above 32°F / 0°C and doesn’t fluctuate much. Maintenance – Sharpening The most important factor of any kind of coring device is sharp cutting tip.
Page 6 The liability of Agratronix is limited to the price of the product at a maximum. Agratronix does not accept any responsibility for any direct, indirect or consequential damages that are caused by the use of the product or the fact that the product could not be used.
Page 8 Manufacturer’s Contact Information Toll-Free 1-800-821-9542 330-562-2222 FAX 330-562-7403 www.AgraTronix.com 10375 State Route 43 Streetsboro, OH 44241...

7190