Monster SuperClean 60 Instruction Manual page 24

Tips on using the Accessories
Window Cleaner
squeegee to the steam gun or use with exten-
sion tube(s) for hard to reach surfaces. Apply
steam abundantly, rub with the soft spongy
edge, then remove excess water and dirt with
the glass wiping edge.
CAUTION: When cleaning windows, always
avoid any sudden changes in temperature to
prevent glass breakage or cracks.
and sanitary fixtures. The detail nozzle will fit
directly onto the steam gun or may be used with
extension tubes.
Detail Brush
It is best for cleaning grout
between tiles, ceramic and
marble.
To use: Push the detail brush
on the end of the detail nozzle, which may be
used directly on the steam gun or with exten-
sion tubes.
ming much easier.
To use: Clip the carpet slider onto the floor brush,
which may be used directly on the steam gun
or with extension tubes. When deep cleaning
carpeting you should vacuum thoroughly befo-
re steaming and then again after steaming to
remove the dirt that is loosened by the steam.
Operating Instruction (cont.)
This dual edge glass & tile
squeegee is very useful
for cleaning large win-
dows, plastic material,
ceramic, tiled or marble
surfaces.
To use: Connect the tile
Detail Nozzle
This attachment is very
useful for cleaning surfaces
that are difficult to reach.
It is ideal for radiators, door
and window jambs, shutters
Carpet Slider
This attachment clips over
the face of the floor brush
preventing the bristles
from interacting with the
carpet, and making stea-
Palette Knife
To use: Push the palette knife on the end of the
detail nozzle, which may be used directly on the
steam gun or with extension tubes.
Tips On How To Use Your System
Water
Use tap water for all your cleaning needs.
However, if you live in an area with hard wa-
ter, use demineralised or distilled water when
steaming light coloured fabrics to eliminate the
possibility of hard water stains.
IMPORTANT: Do not add cleaning solutions, per-
fumes, oils or any other chemicals to the water
used in this appliance. Use tap water or if the
tap water in your area is very hard use distilled
or demineralised water
.
Temperature
The steam temperature just outside the tip of the
nozzle is between 105°C and 115° C.
The temperature of the steam falls to 38°C at a
distance of 25 cm. from the nozzle.
WARNING: A cotton cloth wrapped around
the brush can become hot enough to burn.
Make sure that you let the cloth cool off before
touching it.
Using Cotton Cloths
For best results use 100% cotton white cloths as
supplied. Use correct size of cloth to allow you
to wrap the cloth around the brushes and clip
it under the spring-loaded cloth holder.
The purpose of using a cloth is to absorb moisture
and dirt being removed. Always use dry cloths.
A wet cloth could smear the dirt.
Used cloths can be washed repeatedly in ei-
ther hot or warm water using strong detergent
and/or bleach and dried in a tumble dryer or
on a clothesline.
To avoid greying of other clothes wash heavily
soiled cloths separately.
Use of fabric conditioner will impair the cloth's
ability to pick up dirt and should be avoided.
24
This attachment is best for
removing wallpaper and also
anything that can be scraped
from a flat surface e.g. grease
deposits in an oven. It is also
useful when defrosting freez-
ers.