Scope Of Supply - Dimplex UPH 120-32 PK Installation And Operating Instruction

English
Permissible media to be pumped
Permissible medium temperature
Max. operating pressure of the pump
Sound pressure level
Energy efficiency index
EMC (electromagnetic compatibility)
Emitted interference
Interference immunity
Motor protection
Fault current
1. Observe the manufacturer's specifications regarding mixing ratios. Add any additives to the medium to be pumped on the pressure side of the pump.
CAUTION!
Danger of damage to property!
If impermissible media are pumped, the pump may be
destroyed.
Permissible
Medium temperature
-10 °C ... +95 °C
-10 °C ... +90 °C
-10 °C ... +80 °C
-10 °C ... +70 °C
0 °C ... +65 °C
Table 5.2:
Minimum inlet pressure (above atmospheric pressure) at the
inlet stub to prevent cavitation noise (with medium temperature
T1)
Nominal width
-10 °C...+50 °C
G 2"AG
Table 5.3:
The values are valid up to 300 m above sea level; the values
above this height are higher: 0.01 bar/100 m added height.

5.3 Scope of supply

 Pump, complete
Installation and operating instructions

 2 x flat gasket
Coupling relay

 Connection cable 1.5 m (three-core load, two-core control)
EN-4
Permissible
Max. ambient temperature
+ 40 °C
+ 50 °C
+ 55 °C
+ 60 °C
+ 65 °C
T T
Med Med
+95 °C
0.3 bar 1.0 bar
452115.66.46 · FD 0004
Media to be pumped:

Heating water (according to VDI 2035/VdTÜV Tch 1466)

Water-glycol mixtures, maximum mixing ratio 1:1 (when glycol is added,
the output data of the pump must be adjusted based on the higher vis-
cosity (depending on the proportional mixing ratio)).

Ethylene/propylene glycols with corrosion protection inhibitor
1

Standard oxygen binder
 1
Standard anticorrosive

Standard combination products
 1
Standard cooling brines
Table 5.2 on page 4
PN 10
< 35 dB(A)
 0.23
General EMC: (2004/108/EC); EN 61800-3; EN 61000-6-1 to EN 61000-6-4
EN 61000-6-3, formerly EN 50081-1 (building standard)
EN 61000-6-2, formerly EN 50082-2 (industry standard)
Integrated motor protection as standard
3.5 mA
UPH 120-32PK
1