Configuring Your Pc - Zte MF283U Getting Started

Indicator
3G/4G
NOTE:
The phone function needs the network support.

Configuring Your PC

The following procedure describes how to configure the Internet Protocol in Windows for your
Wi-Fi connection.
1. Right-click Network and select Properties.
2. Select Change adapter settings.
3. Right-click Wireless Network Connection and select Properties.
NOTE:
If you use a network cable to connect your PC to your device, you need to right-click Local Area
Connection and select Properties.
4. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
5. Select Obtain an IP address automatically and Obtain DNS server address
automatically, and click OK.
4
State
Red
Blue blinking
Blue solid
Green blinking
Green solid
Description
The device is turned on but not
registered to the mobile network.
The device is connected to the LTE
network and data is being transferred.
The device is registered to the LTE
network.
The device is connected to the 2G/3G
network and data is being transferred.
The device is registered to the 2G/3G
network.