ZyXEL Communications ZyXEL NBG334SH User Manual page 117

Table 44 NAT Advanced
LABEL
End Port
Trigger
Start Port
End Port
Apply
Reset
ZyXEL NBG-334SH User's Guide
DESCRIPTION
Type a port number or the ending port number in a range of port numbers.
The trigger port is a port (or a range of ports) that causes (or triggers) the ZyXEL
Device to record the IP address of the LAN computer that sent the traffic to a
server on the WAN.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
Click Apply to save your changes back to the ZyXEL Device.
Click Reset to begin configuring this screen afresh.
Chapter 9 Network Address Translation (NAT)
117