Table of Contents
Advertisement
Chapter 3 Introducing the Web Configurator
Table 3 Web Configurator Status Screen (continued)
LABEL
- Configuration Mode
Interface Status
Interface
Status
Rate
Summary
Any IP Table
BW MGMT Monitor
DHCP Table
Packet Statistics
WLAN Station Status
3.4.2 Navigation Panel
After you enter the password, use the sub-menus on the navigation panel to configure ZyXEL
Device features.
The following table describes the sub-menus.
Table 4 Screens Summary
LINK
Status
Network
Wireless
LAN
46
DESCRIPTION
This shows whether the advanced screens of each feature are turned on
(Advanced) or not (Basic).
This displays the ZyXEL Device port types. The port types are: WAN, LAN and
WLAN.
For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up
or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN
is disabled.
For the LAN ports, this displays the port speed and duplex setting or N/A when the
line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using
Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and
Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This field
displays N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is
enabled and N/A when the WLAN is disabled.
Use this screen to view details of IP addresses assigned to devices not in the same
subnet as the ZyXEL Device.
Use this screen to view the ZyXEL Device's bandwidth usage and allotments.
Use this screen to view current DHCP client information.
Use this screen to view port status and packet specific statistics.
Use this screen to view the wireless stations that are currently associated to the
ZyXEL Device.
TAB
FUNCTION
This screen shows the ZyXEL Device's general device, system and
interface status information. Use this screen to access the wizard,
and summary statistics tables.
General
Use this screen to configure wireless LAN.
MAC Filter
Use the MAC filter screen to configure the ZyXEL Device to block
access to devices or block the devices from accessing the ZyXEL
Device.
Advanced
This screen allows you to configure advanced wireless settings.
QoS
Use this screen to configure Wi-Fi Multimedia Quality of Service
(WMM QoS). WMM QoS allows you to prioritize wireless traffic
according to the delivery requirements of individual services.
ZyXEL NBG-334SH User's Guide
Advertisement
Table of Contents
Troubleshooting
