Chapter 2 Introducing The Web Configurator; Accessing The Zyair Web Configurator; Figure 2-1 Change Password Screen - ZyXEL Communications Wireless Access Point ZyAIR B-500 User Manual

Introducing the Web Configurator
This chapter describes how to access the ZyAIR web configurator and provides an overview of its
2.1

Accessing the ZyAIR Web Configurator

Step 1. Make sure your ZyAIR hardware is properly connected (refer to the Quick Installation Guide).
Step 2. Prepare your computer/computer network to connect to the ZyAIR (refer to the appendix).
Step 3.
Launch your web browser.
Step 4. Type "192.168.1.2" (default) as the URL.
Step 5. Type "1234" (default) as the password and click Login. In some versions, the default password
appears automatically - if this is the case, click Login.
Step 6. You should see a screen asking you to change your password (highly recommended) as shown
next. Type a new password (and retype it to confirm) and click Apply or click Ignore to allow
access without password change.
Step 7.
You should now see the MAIN MENU screen.
Introducing the Web Configurator
ZyAIR B-500 Wireless Access Point User's Guide
screens. The default IP address of the ZyAIR is 192.168.1.2.

Figure 2-1 Change Password Screen

Chapter 2
2-1