ZyXEL Communications Wireless Access Point ZyAIR B-500 User Manual page 181

2.
Click Network in the icon bar.
- Select Automatic from the Location list.
- Select Built-in Ethernet from the Show list.
- Click the TCP/IP tab.
3.
For dynamically assigned settings, select Using DHCP from the Configure list.
4. For statically assigned settings, do the following:
-From the Configure box, select Manually.
-Type your IP address in the IP Address box.
-Type your subnet mask in the Subnet mask box.
-Type the IP address of your ZyAIR in the Router address box.
5. Click Apply Now and close the window.
6. Turn on your ZyAIR and restart your computer (if prompted).
Check your TCP/IP properties in the Network window.
Setting Up Your Computer's IP Address
Verifying Your Computer's IP Address
ZyAIR B-500 Wireless Access Point User's Guide
C-11