Usb Cables - Motorola moto g4 PLAY Manual

Connect & transfer
Connect & transfer
Quick start: connect & transfer
Bluetooth wireless
Wi-Fi networks

USB cables

Share your data connection
Data usage
NFC
Your cloud
Phone & tablet
Memory card
Virtual Private Networks (VPN)
Mobile network
Aeroplane mode
Menu More
Back Next
3 Tap a found network to connect it (if necessary,
enter , and
Network SSID Security
and tap ).
Connect
When your phone connects, the Wi-Fi status
indicator appears in the status bar.
Note: if you see a question mark in the Wi-Fi status
indicator , swipe the status bar down, tap the
network and enter the network's password.
Tip: when Wi-Fi is on, your phone automatically
reconnects to available networks it has used before. If a
router previously had no Internet connection, your phone
will not automatically connect to it.
Wi-Fi hotspot
Note: this phone supports apps and services that may
use a lot of data, so make sure your data plan meets
your needs. Contact your service provider for details.
You can make your phone a Wi-Fi hotspot to provide
portable, convenient Internet access to other Wi-Fi-
enabled devices.
Note: keep it secure. To protect your phone and
hotspot from unauthorised access, it is strongly
recommended that you set up hotspot security (WPA2
is the most secure), including password.
Find it: Apps > >
Settings More
and select
mobile hotspot Mobile Wi-Fi hotspot
Note: these steps may vary depending on your network.
1 Your phone turns off Wi-Fi and uses the mobile
, network for Internet access. Tap
Wireless password
to set up security:
2 Tap
When your Wi-Fi hotspot is active, other Wi-Fi
enabled devices can connect by entering your
hotspot's
entering the correct
Wi-Fi modes
For those who like to get a bit more technical, your phone
supports the following Wi-Fi modes: 802.11b, g, n, ac.
USB cables
Note: copyright — do you have the right? Always follow
the rules. See "Content Copyright" in the legal and
safety information on your phone.
>
Tethering &
To load music, pictures, videos, documents or other files
from your computer, connect your phone to your computer
with a USB cable. To change the type of USB connection (if
necessary), swipe the status bar down and tap
Set up Wi-Fi hotspot
• Network SSID: enter a unique name for your hotspot.
• Security: select the type of security you want:
or . For , enter a unique password that
WPA2 WPA2
others will need to access your Wi-Fi hotspot.
Note: is recommended by IEEE.
WPA2
• Password: create a password with at least
eight characters.
.
SAVE
, selecting a
Network name Security
.
Wireless password
open
type and
.
USB