Usb Cables - Motorola Moto M Manual

Connect & transfer
Connect & transfer
Quick Start: connect & transfer
Bluetooth wireless
Wi-Fi networks

USB cables

Share your data connection
Data use
Your cloud
Phone & tablet
Memory card
Virtual Private Networks (VPN)
Mobile network
Aeroplane mode
Menu More
Next
Back
3 Tap a found network to connect it (if necessary,
enter , and
Network SSID Security
tap ).
Connect
When your phone connects, the Wi-Fi status
indicator appears in the status bar.
Note: if you see a question mark in the Wi-Fi status
indicator , swipe the status bar down, tap the network
and enter the network's password.
Tip: when Wi-Fi is on, your phone automatically reconnects
to available networks it has used before. If a router previously
had no internet connection, your phone will not
automatically connect to it.
Wi-Fi hotspot
Note: this phone supports apps and services that may use a
lot of data, so make sure your data plan meets your needs.
Contact your service provider for details.
You can make your phone a Wi-Fi hotspot to provide
portable, convenient internet access to other Wi-Fi enabled
devices.
Note: keep it secure. To protect your phone and hotspot
from unauthorised access, it is strongly recommended that
you set up hotspot security (WPA2 is the most secure),
including password.
Find it: Apps > >
Settings More
and select
hotspot Portable Wi-Fi hotspot
Note: these steps may vary depending on your network.
1 Your phone turns off Wi-Fi and uses the mobile network for
, and internet access. Tap
Wireless password
2 Tap
When your Wi-Fi hotspot is active, other Wi-Fi enabled
devices can connect by entering your hotspot's
name
Wi-Fi modes
For those who like to get a bit more technical, your phone
supports the following Wi-Fi modes: 802.11b, g, n, ac.
USB cables
Note: copyright – do you have the right? Always follow the
rules. See "Content Copyright" in the legal and safety
information on your phone.
To load music, pictures, videos, documents or other files
from your computer, connect your phone to your computer
>
Tethering & portable
with a USB cable. To change the type of USB connection (if
necessary), swipe the status bar down and tap
Tip: make sure you connect the phone to a high power USB
port. Typically, these are located directly on your computer.
Set up Wi-Fi hotspot
• Network name: enter a unique name for your hotspot.
• Security: select the type of security you want: None or
PSK. For PSK, enter a unique password
WPA2 WPA2
that others will need to access your Wi-Fi hotspot.
Note: PSK is recommended by IEEE.
WPA2
• Password: create a password with at least eight
characters.
.
SAVE
and entering the correct
Wireless password
en-GB
to set up security:
Network
.
.
USB