Sound Engine - Korg KROSS 2 Series Manual

KROSS 2 Specifications
Keyboard
KROSS 2 61
・ 61 keys (velocity sensitive; aftertouch not supported)
・ Normally C2 ─ C7(adjustable in the range [C1...C6] ─ [C3...C8]
KROSS 2 88
・ 88 keys NH (Natural weighted hammer action) keyboard (no aftertouch)
・ Normally A0 ─ C8 (adjustable in the range -A-1...C7) ─ [A1...C9])
* The NH keyboard delivers a playing feel similar to that of an acoustic piano, with low notes being heavier and high notes being lighter.
System
・ EDS-I Enhanced Definition Synthesis - integrated

Sound Engine

Maximum Polyphony
・ 120 voices (120 oscillators), single mode
・ 60 voices (60 oscillators), single mode
* The actual maximum polyphony will vary depending on oscillator settings such as stereo multisamples and velocity crossfading.
Preset PCM Memory
・ Approximately 128 MB (calculated as 48 kHz / 16-bit linear PCM data equivalent)
・ 496 multisamples (including seven stereo), 1014 drumsamples (including 49 stereo)
Expansion PCM Memory
・ Approximately 128MB (*when converted to 48 kHz 16-bit linear PCM
* Used when loading option PCM
Program
・ Oscillator: OSC1 (Single), OSC1+2 (Double): Stereo multisamples are supported 4 velocity zones per oscillator, with switching,
crossfades and layers.
・ Filters: Four types of filter routing (single, serial, parallel, 24 dB)
Two multi-mode filters per voice (low pass, high pass, band pass, band reject)
・ Modulation: For each voice, two envelope generators (Filter & Amp), two LFOs, two key trackinggenerators (Filter & Amp), and
two AMS mixers. In addition, pitch EG, common LFO, and two common key tracking generators
Combination
・ Timbres: Up to 16 timbres, switchable via key zone or velocity zone, layer and crossfade supported, Tone Adjust function allows
program settings to be offset
・ Master Keyboard functionality: These allow you to control external MIDI devices
Drumkits
・ Stereo and mono drumsamples. 4-way velocity switches with crossfades and adjustable crossfade shapes (Linear, Power, Layer).