AEG FAVORIT 99009 M0P User Manual page 28

28 www.aeg.com
6.2 Filling the salt container
When it is necessary to fill the
salt container, the display shows
a message.
The message is off while a pro-
gramme operates.
6.3 Filling the rinse aid dispenser
When it is necessary to fill the
rinse aid dispenser, the display
shows a message.
The message is off while a pro-
gramme operates.
A B
A
+ -
C
D
1. Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt con-
tainer (only for the first time).
3. Fill the salt container with dishwash-
er salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out
from the salt container when you
fill it. Risk of corrosion. To pre-
vent it, after you fill the salt con-
tainer, start a programme.
1. Press the release button (D) to open
the lid (C).
2. Fill the rinse aid dispenser (A), no
more than the mark 'max'.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the re-
lease button locks into position.
You can turn the selector of the
released quantity (B) between
position 1 (lowest quantity) and
position 4 (highest quantity).