sparkfun RedBot Assembly Manual page 2

We have two flavors of the RedBot available - the Basic kit and the
SparkFun Inventor's Kit for RedBot. If you have the SparkFun RedBot Basic
Kit, you can skip the sections marked with (SIK).
Alternatively, you can pick up additional sensors to install on your RedBot.
These parts include the Wheel Encoder Kit, RedBot Buzzer, and two
RedBot Mechanical Bumpers. Follow the sections in this guide that covers
any of the extra sensors you might have.
RedBot Extra Sensors
SparkFun USB Mini-B Cable - 6 Foot
CAB-11301
This is a USB 2.0 type A to Mini-B 5-pin cable. You know, the mini-B c
(2) Jumper Wire - 0.1", 3-pin, 6" (Black, Red, White)
PRT-13164
This is a simple three wire cable. Each cable is 6" long and is great fo
SparkFun RedBot Buzzer
ROB-12567
This buzzer is an add-on for your RedBot that gives your robot the abi
Wheel Encoder Kit
ROB-12629
This is the Wheel Encoder Kit from DAGU, a simple add-on to any wh
(2) SparkFun RedBot Sensor - Mechanical Bumper
SEN-11999
These simple switches are the Mechanical Bumper sensor for the Sp
The SIK for RedBot has a few extra parts that you won't see in the Basic
Kit. These include the mechanical bump sensors (whiskers), the buzzer,
and wheel encoders. If you have the SIK for RedBot, you can follow all the
sections in this guide, including those marked with (SIK).
SparkFun Wish List
...
...
...
...
...