Display Structure; Explanation Of Standard Symbols; Symbols In Graphics/Instructions - salmson SIE Installation And Starting Instructions

English
8.2

Display structure

8.3

Explanation of standard symbols

Symbol Description
Constant speed control
Constant control
Δpc
Variable control
Δp-v
PID control
Input In (external setpoint)
2
activated
Access disable
BMS (Building Management System)
is active
DP/MP operating mode:
Parallel operation
8.4

Symbols in graphics/instructions

76
Information appears on the display as shown in the sample illustration
below:
1
1 0 0 0
4
2
5
max
min
4
2
Fig. 26: Display structure
Pos. Description
1 Menu number
2 Value display
3 Units display
NOTE
The display can be rotated by 180°. To change, see menu number
<5.7.1.0>.
The following symbols are shown on the display at the positions
shown above:
Symbol Description
Min operation
min
Max. operation
max
Pump is running
Pump stopped
Pump running in emergency operation
Pump stops in emergency operation
DP/MP operating mode: Main/reserve
–
Section 8.6 "Operating instructions" on page 79 contains graphics
that illustrate the operating concept and provide instructions for con-
figuring settings.
In the graphics and instructions, the following symbols are used as
simple representations of menu elements or actions:
0 0 0
R P M
Pos. Description
4 Standard symbols
5 Symbol display
Pompes Salmson 04/2012
4
2
3