6-9.
Front Board
Preparation
1.
Remove the top cover. (Refer to
2.
Remove the DVD drive assembly. (HVO-550MD only) (Refer to
Procedure
1.
Disconnect the two harnesses from the two connectors on the MB board.
Harness
MB board
2.
Remove the four screws to detach the front assembly.
B3 x 6
(Tightening torque: 0.5 ± 0.05 N•m)
HVO-500MD/HVO-550MD
"6-2. Top
Cover")
Connector
Connector
"6-5. DVD Drive (HVO-550MD
Harness
Front assembly
B3 x 6
(Tightening torque: 0.5 ± 0.05 N•m)
Only)")
6-13