Dc Fan - Sony HVO-500MD Service Manual

6-8.

DC Fan

Preparation
1. Remove the top cover. (Refer to
2. Remove the DVD drive assembly. (HVO-550MD only) (Refer to
Procedure
1. Open the clamp and release the harness.
2. Disconnect the harness from the connector on the MB board.
Harness
MB board
3. Remove the two screws to detach the fan bracket and the DC fan.
Fan bracket
Harness
Note
Install the DC fan carefully paying attention to the label side and the harness position.
4. Install the removed parts by reversing the steps of removal.
HVO-500MD/HVO-550MD
"6-2. Top Cover")
Clamp Connector
DC fan
"6-5. DVD Drive (HVO-550MD
Label
PSW3 x 20
(Tightening torque: 0.5 ± 0.05 N•m)
Only)")
PSW3 x 20
(Tightening torque: 0.5 ± 0.05 N•m)
6-12