LINEA
Quax
First dreams
®
First steps
Step 3 : Use the parts AB2 of step 2, four bottom supports C, the slatted bottom EB4 and four bolts D
Push the bottom supports (C) with their pin into the provided drillings on the end sides (AB2), check the detail.
Make sure that all of the bottom supports are positioned at the same height. Insert the bottom (EB4) into the bed.
Push the bolts (D) through the drillings in the bottom and tighten into their supports.
fi xed with screws in order to comply with the European
24
54 01 46xx
Babybed 120x60 cm
Kinderbett 120x60 cm
legislation.
Lit enfant 120x60 cm
Baby bed 120x60 cm
The bottom needs to be