Connect The Hardware - ZyXEL Communications P-660R-T1/T3 V2 Quick Start Manual

Overview
This Quick Start Guide shows you how to:

1 Connect the Hardware

1 Connect the Hardware
1 ETHERNET: Use an Ethernet cable to connect a computer
to the ETHERNET port for Internet access.
2 DSL: Use a telephone wire to connect your P-660R-T1/T3
v2's DSL port to a telephone jack (or to a splitter, if one is
already installed).
3 POWER: Use only the included power adaptor to connect
the POWER socket to an appropriate power source.
P-660R-T1/T3 v2 Quick Start Guide
3
2 Set Up Internet Access
1
1
2