Technical Data - AEG L 88489 FL User Manual

Problem
The drum is empty and
the display shows there
is some weight in (J).
The drum is full but the
display shows 0.0 kg
(J).
After the check, activate the appliance. The programme continues from the point of inter-
ruption.
If the problem occurs again, contact the service centre.
If the display shows other alarm codes, contact the service centre.
Service
We recommend that you write the information here:
Model
(MOD.)
Product number
(PNC)
Serial number
(S.N.)

TECHNICAL DATA

Dimensions
Electrical connection:
Water supply pressure
Possible cause
Incorrect temperature was set. Make sure that you set the correct tem-
Too much laundry load.
It is necessary to set a tare.
You loaded the laundry before
to activate the appliance.
Width / Height / Depth
Voltage
Overall power
Fuse
Frequency
Minimum
Maximum
Possible solution
perature.
Decrease the laundry load.
Press button
ance and to activate it again.
Press button
ance. Empty the drum and obey to the
necessary steps. (Refer to 'Loading the
laundry')
• Refer to the information supplied with
this appliance for guarantee condition
and point of contact. The information to
give to the service is on the rating plate.
..................
..................
..................
Technical data
to deactivate the appli-
1
to deactivate the appli-
1
600 / 850 / 605 mm
230 V
2200 W
10 A
50 Hz
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
29