Datapath VisionLC-SDI Manual

Single channel live capture card

Hide thumbs Also See for VisionLC-SDI:

Download this manual

Datapath Limited claims copyright on this

documentation. No part of this documentation may be

reproduced, released, disclosed, stored in any electronic

format, or used in whole or in part for any purpose other

than stated herein without the express permission of

Datapath Limited.

Whilst every effort is made to ensure that the

information contained in this documentation is correct,

Datapath Limited make no representations or warranties

with respect to the contents thereof, and do not accept

liability for any errors or omissions.

Datapath reserves the right to change specification

without prior notice and cannot assume responsibility for

the use made of the information supplied.

Datapath Limited acknowledges all registered

trademarks used within this documentation.

Product

VisionLC-SDI Quick Start Guide

Classification

Released

UK Headquarters

Datapath Ltd.,

Bemrose House, Bemrose Park,

Wayzgoose Drive,

Derby,

DE21 6XQ,

United Kingdom

Tel: +44 (0) 1332 294441

Fax: +44 (0) 1332 290667

Email: sales@datapath.co.uk

Web: www.datapath.co.uk

VisionLC-SDI

Single Channel Live Capture Card

Page 1 Whilst every effort is made to ensure that the Fax: +44 (0) 1332 290667 information contained in this documentation is correct, Datapath Limited make no representations or warranties with respect to the contents thereof, and do not accept Email: sales@datapath.co.uk liability for any errors or omissions.
Page 2 Remove the VisionLC-SDI card from its packaging and secure it firmly into the empty PCIe slot. Screw the VisionLC-SDI bracket to the back panel of the PC and replace the cover. Connect the cable(s) (not supplied) distributing the signals to the connectors on the We suggest that you regularly visit the Datapath web site VisionLC-VisionLC-SDI card.