Datapath VisionSD4+1S Manual

Four channel video and one channel rgb/dvi/ hd capture card

Download this manual

Datapath Limited claims copyright on this

documentation. No part of this documentation may be

reproduced, released, disclosed, stored in any electronic

format, or used in whole or in part for any purpose other

than stated herein without the express permission of

Datapath Limited.

Whilst every effort is made to ensure that the

information contained in this documentation is correct,

Datapath Limited make no representations or warranties

with respect to the contents thereof, and do not accept

liability for any errors or omissions.

Datapath reserves the right to change specification

without prior notice and cannot assume responsibility for

the use made of the information supplied.

Datapath Limited acknowledges all registered

trademarks used within this documentation.

UK Headquarters

Datapath Ltd.,

Bemrose House, Bemrose Park,

Wayzgoose Drive,

Derby,

DE21 6XQ,

United Kingdom

Tel: +44 (0) 1332 294441

Fax: +44 (0) 1332 290667

US Office

Datapath North America

2490 General Armistead Avenue

Suite 102

Norristown, PA 19403

USA

Tel: +1 484 679 1553

Email: sales@datapath.co.uk

Web: www.datapath.co.uk

VisionSD4+1S

Four Channel Video and One Channel RGB/

DVI/ HD Capture Card

Page 1 Whilst every effort is made to ensure that the US Office information contained in this documentation is correct, Datapath North America Datapath Limited make no representations or warranties 2490 General Armistead Avenue with respect to the contents thereof, and do not accept Suite 102 liability for any errors or omissions.
Page 2 Your packing box should contain the following items: You are likely to need a flat blade and a Phillips head Insert the Datapath CD into your CD drive, the CD will screwdriver for the installation of the capture card; autorun and display the following dialogue. If the CD The VisionSD4+1S video capture card.