USB Connection
USB-C Connection
Connect one end of a USB Type-C cable to the USB-C port of your device. Then
connect the other end of the cable to the USB-C port of your projector.
NOTE:
• Ensure your USB Type-C device can support video transmission.
• The M2e can also use a USB-C connected power bank to turn on the
system. However, the brightness level will be limited to 50% and 30% when
the Light Source Level is set as Full or Eco respectively.
USB Type-A Connection
Connect one end of a USB Type-A cable to the USB-A port of your device (if
applicable). Then connect the other end of the cable to the USB A port of your
projector.
Additionally, you can connect a keyboard, a mouse, dongles, storage devices, etc. to
the projector's USB-A port. To learn more about managing storage device, e.g. USB
Flash Drive, content, see page 50.
19