INSTRUCTION SHEET
Additional B18 series applications
Fig. 1
4WN
Assemble as shown using B18 series hangers with
additional products listed in sizing chart on this page.
This installation allows either 2 or 4 runs of
conduit to box. Determine your needs and
push either 1 or 2 plain center hole B18
assemblies onto rod.
Pentair, CADDY, ERICO CADWELD, ERICO CRITEC, ERICO, ERIFLEX, and LENTON are owned by Pentair or its global affiliates. All other trademarks
are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.
TECHNICAL SUPPORT:
www.erico.pentair.com
Fig. 2
Threaded Rod Hangers
CFS223_J
4 OF 4
Sizing Chart
Part Number Fig.
4WN
1
1/4" [6] Threaded rod to 1/8" [3] through 1/4" [6] flange
4TI24
2
1/4" [6] Threaded rod to 5/16" [8] through 1/4" [6] flange
4TI58
2
1/4" [6] Threaded rod to 5/16" [8] through 1/2" [13] flange
4TI912
2
1/4" [6] Threaded rod to 9/16" [14] through 3/4" [19] flange
6TI24
2
3/8" [10] Threaded rod to 5/16" [8] through 1/4" [6] flange
6TI58
2
3/8" [10] Threaded rod to 5/16" [8] through 1/2" [13] flange
6TI912
2
3/8" [10] Threaded rod to 9/16" [14] through 3/4" [19] flange
© 1998-2017 Pentair All Rights Reserved
Description