Advertisement
INSTRUCTION SHEET
Multiple conduit/cable assembly
To add additional conduit clips, position the additional
clip over the slot on the B18CO. Secure with screw part
number S3575BP50 (1/4-20 x 3/8" [10] round head).
Conduit clips can slide within the slots to position
them with the knockouts in the electrical box.
Attaching B18 series assembly to box
Attach box with two self tapping screws (SMS8)
using the mounting holes on B18.
Attaching cable/conduit to B18 series assembly
For conduit/cable installation into 6M, 812M
and 16M clips.
After conduit/cable is installed into box, snap
clips closed around conduit/cable.
Pentair, CADDY, ERICO CADWELD, ERICO CRITEC, ERICO, ERIFLEX, and LENTON are owned by Pentair or its global affiliates. All other trademarks
are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.
TECHNICAL SUPPORT:
www.erico.pentair.com
CFS223_J
2 OF 4
For cable installation into MCS50 and MCS100.
Insert cables into opening as shown then slide
cables around the "U".
MCS50 holds approximately 4 cables (
through
0.560 [14.22])
MCS100 holds approximately 8 cables.
© 1998-2017 Pentair All Rights Reserved
0.430 [10.92]
Advertisement
