CONTROLS
Park assistance button
Camera
The camera lens is located between the li-
cense plate lights.
The image quality may be impaired by dirt.
If necessary, clean the camera lens.
Switching on/off
Switching on automatically
The system is switched on automatically if
selector lever position R is engaged when
the engine is running.
Automatic deactivation during
forward travel
The system switches off when a certain
driving distance or speed is exceeded.
Switch the system back on, if needed.
Depending on the vehicle equipment:
switching on/off manually
Press the park assistance button.
–
On: the LED lights up.
–
Off: the LED goes out.
The parking assistance functions are shown
on the Control Display.
180
Driving comfort
Online Edition for Part no. 01402666575 - VI/19
Switching the view via the Central
Information Display (CID)
If the rearview camera view is not dis-
played, change the view via the Central In-
formation Display (CID):
"Rear view camera"
The rearview camera image is displayed.
Display on the Control Display
Functional requirement
–
The rearview camera is switched on.
–
Split doors are completely closed.
–
Keep the recording range of the camera
clear.
Protruding cargo or carrier systems and
trailers that are not connected to a
trailer power socket can lead to malfunc-
tions.
Activating assistance functions
More than one assistance function can be
active at the same time.
–
Parking aid lines
"Parking aid lines"
Lanes and turning radius lines are indi-
cated.
–
Obstacle marking
"Obstacle marking"
Obstacles are marked, depending on the
vehicle equipment.
Need help?
Do you have a question about the CLUBMAN and is the answer not in the manual?
Questions and answers