ZyXEL Communications ZyXEL ZyWALL 35 Quick Start Manual page 4

LABEL
EXTENSION
CARD SLOT
Turn off the ZyWALL before inserting or removing an 802.11b/g-compliant wireless LAN
PCMCIA or CardBus card (to avoid damage).
POWER Connect the included power adaptor (use only this adaptor) to this power socket.
12VDC
1.3 Setting Up Your ZyWALL
1.
Connect your cable/DSL modem(s) to WAN1 port and/or WAN2 port with the Ethernet cable(s) that
came with your modem(s).
2. Connect computers or hubs to LAN ports with Ethernet cables.
If you configure these ports as DMZ ports in the LAN or DMZ screen through the Web configurator,
connect publicly accessible servers (Web, FTP, etc.) to these ports to make them visible to the outside
world.
ZyWALL 35 Internet Security Appliance
Do not insert or remove a card with the ZyWALL turned on.
Do not force, bend or twist the wireless LAN card.
DESCRIPTION
3