Figure 48 Wireless Security: Wep; Table 18 Wireless Security: Wep - ZyXEL Communications ZyXEL ZyAIR G-570S User Manual

Figure 48 Wireless Security: WEP

The following table describes the labels in this screen.

Table 18 Wireless Security: WEP

LABEL
Encryption Method Select WEP if you want to configure WEP encryption parameters.
Authentication
Type
WEP Encryption
Passphrase
Generate
Key 1 to
Key 4
Apply
Reset
Chapter 6 Wireless Screens
DESCRIPTION
Select Auto, Open or Shared from the drop-down list box.
Select 64 bit WEP, 128 bit WEP or 152 bit WEP to enable data encryption.
If you selected 64-bit or 128-bit WEP, you can enter a "passphrase" (password
phrase) of up to 32 case-sensitive printable characters and click Generate to have
the device create four different WEP keys.
After you enter the passphrase, click Generate to have the device generates four
different WEP keys automatically.
If you want to manually set the WEP keys, enter the WEP key in the field provided.
Select a WEP key to use for data encryption.
The WEP keys are used to encrypt data. Both the device and the wireless stations
must use the same WEP key for data transmission.
If you chose 64 bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128 bit WEP, then enter 13 ASCII characters or 26 hexadecimal
characters ("0-9", "A-F").
If you chose 152 bit WEP, then enter 16 ASCII characters or 32 hexadecimal
characters ("0-9", "A-F").
Click Apply to save your changes back to the device.
Click Reset to begin configuring this screen afresh.
ZyXEL G-570S User's Guide
83