Advertisement
Quick Links
Advertisement
Related Manuals for No Butts Bin SR1587
Summary of Contents for No Butts Bin SR1587
- Page 1 Assembly Instructions Shelter type: SR1587 SR1587-05-210219-USA...
- Page 2 EXPLODED VIEW Tools required: Tools included: Drill/Screwdriver Spanner Mallet Torx bit Hack saw...
- Page 3 PARTS LIST DIMENSION DIMENSION ITEM DESCRIPTION IMAGE QTY. PART NO. (INCHES) (MM) FRAME 2000 x 1035 78.74 x 40.55 CORNER 110 x 110 4.33 x 4.33 BRACKET PLATE/BRACKET 130 x 30 x 3 8.66 x 1.57 140 x 40 x 5.51 x 1.57 x STUB S1 STUB...
- Page 4 Step 1 Assemble S1 frames to make up the main structure using CB1 brackets in the corners and JF1 brackets on the straight joints. Attach the S1 stub as shown using JF1, CF1 and JF3 brackets. MEASUREMENTS IN BLUE - MM MEASUREMENTS IN GREEN - INCHES S1 STUB Check the dimensions...
- Page 5 Step 2 Attach first R4 rafters using RB1 brackets on the back of the shelter and S1 stubs in the middle.
- Page 6 Step 3 Assemble the T-frame using two ST9 tie bars and a P4 post. Join the two ST9 bars together first using JF3 brackets, then attach the P4 post using two RB2 brackets. DETAIL C SCALE 1 : 4...
- Page 7 Step 4 Use L1 brackets to attach the T-bar to the front of the shelter and install the remaining R4 rafters using RB1 brackets on the rear and L1 brackets at the front. Attach the FT1 and FT3 brackets and move the shelter in to its final position before using anchor bolts to secure it to the ground.
- Page 8 Step 5 Stick sealing strips (SS) to the rafters and align the ACE2 panels to the outside of the shelter and centralise the ACC2 panel in the centre. ACC2 ACE2 ACE2 ACE2 ACE2 ACE2...
- Page 9 Step 6 Screw down the RC2 strips directly into the rafter with the 25mm TEC screws to secure the roof panels. Then fit the Black plastic caps on exposed nuts and bolts. Fit the square end caps (EC40) to any open ends of box sections.
- Page 10 Notes:...
- Page 11 PLAN VIEW OVERALL DIMENSIONS AND GROUND FIXING POSITIONS 39.173 41.122 1044.50 85.919 2183.14 Suggested size for concrete base: 200mm / 7.87in oversized on all sides...
- Page 12 THANK YOU FOR PURCHASING THIS PRODUCT MAINTENANCE: To ensure your product gives you many years of use we recommend that you: • Clean panels regularly with soapy water • Ensure all fittings are tight (for example after a big storm) •...