Service; Disposal - Silvercrest SKWH 2000 A1 Operation And Safety Instructions

If functional or other defects occur, please contact
the service department listed either by telephone
or by e-mail.
You can return a defective product to us free of
charge to the service address that will be pro-
vided to you. Ensure that you enclose the proof
of purchase (till receipt) and information about
what the defect is and when it occurred.

Service


If any problems occur during use of your ROWI
Electronics product, please proceed as follows:
Contact us
You can contact the service team of ROWI Electronics at:
ROWI Electronics GmbH
Augartenstr. 3
76698 Ubstadt-Weiher, Germany
Ld-services@rowi-electronics.com
Service hotline: +800 7694 7694
(free call from a German landline)
IAN 324120_1901
Most problems can be fixed with competent technical
advice from our service team.
18 GB/IE/NI/CY
NOTICE: www.
At
lidl-service.com you can
download this manual
as well as many other
manuals, product videos
and software. This QR
code will take you directly
to the Lidl service page
(www.lidl-service.com)
and allow you to open
your operating instruc-
tions simply by entering
the article number (IAN
324120_1901).

Disposal


The device packaging is made of environ-
mentally friendly materials that you can
dispose of at your local recycling centres.
Do not dispose of the product with the
regular household garbage! Bring
it to a municipal collection points for
recycling! In case of doubt, ask your
municipality or city administration how to
dispose of the old device.
Batteries must be recycled in accordance
with Directive 2006/66/EC and must
not be disposed of with household waste.
Every consumer is legally obliged to hand
in all batteries/rechargeable batteries at
a collection point in their municipality/ dis-
trict or in a shop. This obligation aims to
ensure that batteries are disposed of in an
environmentally friendly manner. Only re-
turn batteries when they have been ful¬ly
discharged. Batteries must be removed
from the appliance before disposal.
Observe the marking of the packaging
04
materials for waste separation, which are
PE-LD
marked with abbreviations and numbers
with following meaning: 1–7: plastics/
20–22: paper and fibreboard/80–98:
composite materials.