Subscribe to Our Youtube Channel
Related Manuals for pottery barn kids EMERY
Summary of Contents for pottery barn kids EMERY
- Page 1 EMERY TODDLER BED CONVERSION KIT www.potterybarnkids.com Date: 2014-October-24 Page 1/7 Rev:...
- Page 2 WARNING ENTRAPMENT/STRANGULATION HAZARD: Infants have died in toddler beds from entrapment and strangulation. Failure to follow these warnings and assembly instructions could result in serious injury or death. NEVER use bed with children under 15 months. NEVER place bed near windows where cords from blinds or drapes may strangle a child. ...
- Page 3 PARTS INCLUDED: CONVERSION KIT (1x) CRIB PARTS: EMERY CRIB (sold separately) HARDWARE REQUIRED (from Crib): (A) Allen Key - 1x (B) Bolt (M6 x 50mm) – 2x (C) Bolt (M6 x 40mm) – 2x (D) Bolt (M6 x 20mm) – 4x (F) Half-moon Metal Block –...
- Page 4 If you cannot locate the crib Assembly Instructions, please contact Pottery Barn Kids for another copy. With the help of another adult, carefully turn the crib and place it on a scratch-free surface. Slightly loosen (DO NOT REMOVE) the 2 Bolts (D) using Allen Key (A) so the Left &...
- Page 5 Use Allen Key (A) to remove the two Bolts (D) as seen in the illustration below. *Note: Please keep the two bolts (D) for later use on Toddler bed assembly. Lay down the side of the Mattress Base as seen in the illustration below. Remove the Crib Side by removing 2 Bolts (C), 2 Bolts (B) and Half moon washer as shown in the illustration below.
- Page 6 Attach the Conversion Kit to the Crib Ends by aligning pre-drilled holes with wooden dowels as shown in the illustration below. *Note: Do not fully tighten bolts (B&C) at this point. Attach the mattress base back in place by Inserting the 2 Bolts (D) as shown in the illustration below. Date: 2014-October-24 Page 6/7 Rev:...
- Page 7 Tighten the 2 Bolts (D) as shown in the illustration below. With the help of another adult, stand the assembled unit upright. 10. Check alignments and fully tighten all connections at this time. 11. Assembly is now complete. 12. Place the assembly instructions back into the envelope mounted on the mattress base for future reference. CARE INSTRUCTIONS ...
Need help?
Do you have a question about the EMERY and is the answer not in the manual?
Questions and answers