ZyXEL Communications Powerline Ethernet Multiplug Center PLA491 Quick Start Manual page 8

• If the HomePlug (
work is ready for use.
• If the HomePlug (
make your network more secure, go to the next section to set
up a HomePlug AV network using the ENCRYPT button. If
your powerline devices do not have the ENCRYPT button,
see the User's Guide for instructions on setting up a secure
powerline network.
3 Set Up a HomePlug AV Network with
ENCRYPT
Use the ENCRYPT button to set up a secure connection
between your PLA491 and another HomePlug AV product with
an ENCRYPT button (The PLA-400 v2 is shown in the following
figure as an example).
1 Place the powerline devices close to each other, so you
have time to set up each one. After you set up the first
powerline device, you have 120 seconds to set up the
second powerline device.
• You can disconnect them from the computer or modem (or
other networking product) if you need to, but the powerline
devices need to be plugged into power outlets.
ENGLISH
) lights turn on, your HomePlug AV net-
) lights do not turn on, or if you want to
8